2024-10-12

Idealab Forum

Dare to dream, discuss, and disrupt. – Idealab Forum

Side entry trunnion mounted ball valve

  • This topic is empty.
Viewing 1 post (of 1 total)
  • Author
    Posts
  • #1467
    admin
    Keymaster

      https://www.shhuhangvalve.com/Side-Entry-Trunnion-Ball-Valve-Key-Features-Applications.html

      https://www.shhuhangvalve.com/Side-entry-trunnion-mounted-ball-valve.html

      Side entry trunnion mounted ball valve


      Main features: The ball is fixed by upper and lower trunnions, so the seat rings doesn’t afford too much flow pressure force when valve is in closed position. Under flow pressure, the seat ring floats slightly to the ball and form a tight seal. Small operating torque, small deformation on seats, reliable sealing performance, long service life are the main advantage of trunnion mounted ball valve. Trunnion mounted ball valves are widely used in long distance pipeline and normal industrial pipelines that can withstand various kinds of corrosive or noncorrosive flows.

      Design standard :API 6D ISO 17292

      Side entry trunnion mounted ball valve product range :

      1. Pressure range :CLASS 150Lb~2500Lb

      2. Nominal diameter : NPS 2~60″

      3. Body material:Carbon steel, Stainless steel, duplex stainless steel, Alloy steel, Nickel alloy

      4. End connection : RF RTJ BW

      5. Mode of operation: Lever, Gear box, Electric, Pneumatic, hydraulic device, Pneumatic-hydraulic device;

      Side entry trunnion mounted ball valve product features:

      1. Flow resistance is small;

      2.Piston seat, fire protection-antistatic structure design;

      3.No limitation on the flowing direction of medium;

      4. When valve is in full open position, seat surfaces are outside flow stream that always in full contact with gate that can protect seat surfaces, and suitable for pigging pipeline;

      5.Spring loaded packing can be chosen;

      6.Low emission packing can be chosen according to ISO 15848 requirement;

      7.Stem extended design can be chosen;

      8.Metal to metal seat design can be chosen;

      9. DBB,DIB-1,DIB-2 design can be chosen;

      10.The ball is fixed with a supporting plate and a fixed shaft;

      Vivi
      shshenheng@163.com

    Viewing 1 post (of 1 total)
    • You must be logged in to reply to this topic.